EnviroBind is a renewable resource-based one-component moisture cured polyurethane adhesive intended for bonding substrates to synthetic turf backing.
EnviroBind is a renewable resource based one-component moisture cured polyurethane adhesive.
EnviroBind™ is intended for bonding many substrates to the backing material of synthetic grass, during the splicing process on putting greens, athletic ﬁelds, playgrounds, and other sporting applications.
Always wear the recommended personal protective equipment. Avoid contact with eyes, skin, and clothing. Adequate ventilation is required during the application process. Refer to the SDS for further handling and safety instrustions.
Storage and Packaging
EnviroBind should be kept dry and cool in original packaging. Do not expose containers to open ﬂame, excessive heat, or direct sunlight. EnviroBind is packaged at 17 kg (approximately 4.2 gallons).
The consumption rate is 55-65 sqft gallon (6” spread width x 1/16” thick)
Note: Make sure adhesive and surface are at 45°F (7°C) or above for 48 hours before, during, and 48 hours after installation.
Before application, the surface must be sound, smooth, dry, clean, and free of excessive moisture or alkali. Remove dirt, wax, loose paint, and all other foreign matter that would interfere with a good bond such as curing agents and sealers.
Features & Benefits
- Eco Friendly
- 67% Renewable Resources
- 22% Soybean Oil
- Zero VOC
- One Component
- Excellent adhesion to various substrates
- Do not apply over wet substrates
- Substrate and application minimum temperature: 45°F (7°C)
- Substrate and application maximum temperature: 104°F (40°C)
- Permissible relative humidity: 40-90%
Share this Product